Performance and the reasons of the common several memory maintenance failure

Memory is one of the important parts of the computer, laptop battery memory itself quality or installation problems, then your computer's overall performance will be affected, computer or even various failures, such as not boot, boot black boot alarm. In fact, due to memory problems caused in addition to the failure of the memory itself, basically some small problem for everyone today summed up a common several memory performance of maintenance failures and their causes, and I hope it will help.

First, memory corruption, leading to the boot memory alarm:

This failure should be frequently encountered, and most are still alive and well on the night before the next morning, a boot, not hear the usual "beep" is heard, but "tick, tick, tick ..." ring non-stop, the display image display.

Most of the time of this failure is because the use of the computer environment is not good, the humidity is too large, the process of long-term use, the memory of the finger surface oxidation, resulting in increased contact resistance of memory Goldfinger memory slots, hinder current through thus memory self-test error. The performance of a boot on "Didi" ringing off the hook, that is, we often say "memory alarm.　

The approach of this problem is very simple, is to remove the memory, the memory on both sides of the Goldfinger carefully cleaned using rubber, plug it back to the memory slots. To note here is the direct contact with Goldfinger in Goldfinger scrub, try not to hand, because hands sweat will be attached to cheat on again after a period of time to cause the finger oxidation, repeat the same fault.

Second, the memory can not short-circuit led to a host power:

This situation may be quite a few friends have not encountered before, often this failure memory corruption would be more serious, but the surface of the memory chips, Goldfinger, RC is not necessarily obvious signs of burning, sometimes exactly the same, and good memory. But the memory will be inserted into the motherboard , the motherboard can not power up. When the power supply into the power plug, the power switch is pressed, the host no CPU fan and power supply fan is not working, the power indicator does not turn on, and no power is exactly the same.