Maintenance and use of the computer's CD-ROM drive Note

 1, the work can not move the CD-ROM

CD-ROM drive is a high-precision equipment, laser head floating height of the surface of the disc when the work of a few microns. When the CD-ROM is a read-write state, HP laptop battery the event of a large shock, may be caused by the impact of the laser head and the disc, causing damage. So do not move in the CD-ROM drive in the run. In the CD-ROM drive installed, the demolition process should be more careful, drive mobile transport non-bump protection, it is best to use a foam or sponge packaging, to minimize vibration.

2, the CD-ROM drive operation action to light

Very thin optical drive tray bracket institutions, access to the disc in the tray to be careful not to slam down the pressure plate, nor can foreign body collision pop-up bracket, otherwise the bracket will be deformed or broken. Must retract the bracket to the optical drive internal by key or command from the control circuit automatically bracket recover without applying hand force to push the bracket back into the drive to prevent bracket mechanical damage and internal transfer to a plate institutions Electric failure.

3, set the cache to improve the optical drive to read and write speed

Speed ??this indicator will be marked on each drive enclosure , but the speed is usually said drive may reach a maximum speed under ideal conditions, and in the actual use of the process, the CD-ROM drive to read and write speed may also be vulnerable to computer itself running speed constraints. To this end, IBM laptop battery we only reasonable set computer, to try to make the drive to achieve the desired value. In fact, here we can set the cache to improve the running speed of the optical drive. Usually drive cache when manufacturers in the production of the "hard" in the internal drive to establish cache. Through the optical drive optimization software as well as speed up software, but we can try to increase the optical drive's Cache to improve the efficiency of data transmission. In addition, we also items of equipment in the control panel to open the drive's DMA drive the speed will accelerate. If you drive with the manufacturers produce specialized driver, it is best to your CD-ROM drive installed.